A.C Motor Control Speed Devices from 0.75 KW up to 300 KW

 

DATATURK A.C MOTOR Speed Control Systems serve in the field of A.C Motor speed control from mono phase- transition device up to three phases - transition one. Software program is designed by means of DSPICS of micro units with the best performance of MİCROCHIPS family. It is provided with an easily programmable capability in every country with three language options except Turkish. Motor short circuit protection by means of the power range consisting of MITSUBISHI IPM (Intelligent Power Modules) .

SPECIFICATIONS:
Easy installation and programming
High raising moment
2X16 characters of LCD display, membrane keypad, and three language options except Turkish for the user
Monitoring set and the motor frequency, rotation direction of motor, motor flow, and the on the display
continuous saving of the last operating and the menu information in flash eeprom even after the energy is cut.
Set value input with the keypad: 00.00 Hz ...204 Hz 1-1000 accuracy
High resolution of analog input . 0...10 Vol.complete isolation (16 bit))
Complete isolation (16 bit) 0...10 V with the external potentiometer from analog channels
Programmable constant frequency option from the menu by means of three digital inputs
Adjustable accelerating/decelerating time thanks to programmable accuracy . 00,0...999,9 min.
Inverter maximum output frequency: 00,00...204.00 Hz
Switching frequency: 2...20kHz
Input supply voltage openings: 154...364V, 304...456V
Mono phase: 154V...254V
Three phases: 304V...456 V

Input supply voltage tolerance: -/+ 20%.
Input supply voltage frequency range 47...63 Hz
Inverter output voltage
Mono phase feeding: 0...220V
Three -phase feeding: 0...380V

Operation medium heat: 0-40C
Braking: %30
Power: Nominal 50% overload 200%
Cos Q : 0,98.
Relative humidity: 5...95%
Cooling: dry cold air
Signal output:
Contact Run, Alarm
LCD display over voltage, low voltage, over flow, motor circuit and start protection

Over Voltage Protect = 380V + %20 => 456V

Under Voltage Protect = 380V_ %20 =<304V

Over Current Protect = %200 Over load

PROGRAM

Adjustable Programming :
‘’t0’’= (External Command) ‘’t0’’= 0 0 / ( Analog Input ) ‘’t0’’= 0
( Selected) ’’t0’’= 0‘’t1’’= (Buton)‘’t1’’= 0 0 / (Continuous Contact) ‘’t1’’= 0
(Selected) ‘’t1’’= 0
‘’t2’’=(Acceleration Time) 1 ..... 99
(Selected) ‘’t2’’= 0
‘’t3’’=(Deceleration Time)1 .... 99
(Selected) ‘’t3’’= 0
‘’t4’’= Maksimum Speed Adjust %10 Hz ...... %99
(Selected) ‘’t4’’=9 9

‘’t5’’=( Break)‘’t5’’= 0 1 / (No Break)‘’t5’’= 0
(Selected)‘’t5’’=0
‘’t6’’=( Reversible)‘’t6’’= 0 1 / (No Reversible)‘’t6’’= 0 0
(Selected) ‘’t6’’= 0 0
‘’t7’’=(Jog Speed-II.Speed) %0 Hz ..... %99
(Selected) ‘’t7’’= 0 5
‘’t8’’=(Reverse Speed)
( Reverse Speed =Forwad Speed)‘’t8’’= 0 0 No
(Adjustable Reverse Speed)‘’t8’’= 0 1 Yes
(Selected) ‘’t8’’= 0 0
‘’t9’’ = ( Reverse Speed Adjust) %0.....%99Hz
‘’11’’ = ( Starting Torque Adjust )
‘’12’’= (Adjustable boost Voltage) (Starting Torque)
‘’13’’= (Forward / Reverse Timer study ) Working ‘’15’’
‘’14’’= ( Forward Working second / minute selection)
‘’0 1’’ = second ‘’ 0 0’’ = minute
‘’15’’= (Reverse Working second / minute selection)
‘’0 1 = second ‘’0 0’’ = minute
‘’16’’= ( Stop Time ...second / minute selection)
‘’0 1= second ‘’0 0’’ = minute
‘’17’’= ( Forward working time adjust )
0......99
‘’18’’= ( Reverse working time adjust )
0.....99
‘’19’’= ( Stop Time adjust )